Remote Control for the Audio Control Center
Model 458
10 May 2004
(Screen resolution of 1024 x 768 or better is suggested
for viewing the graphs in this data sheet.)
The model 458 cable plugs into the Audio Control Center (ACC) back
panel and allows selection of the input and output connectors from
a remote location. When either or both of the ACC selector switches
are set to "Remote", the Remote Control can be used. When either or
both of the Remote Control selector switches are set to "Off", the
ACC front panel switches can be used.
No audio signal switching is done in the Remote Control. All
switching is done by controlling the DC operated relays in the ACC.
A 15-foot cable is standard but other lengths can be ordered at an
additional cost.
FURNISHED:
Printed User Guide. The User Guide in .pdf format can also be downloaded
from this web site.
PHYSICAL:
Cast aluminum enclosure measures 168 x 120 x 75 mm (6.7 x 4.8 x 3
inches) overall including knobs. Weight is 800 gm (about 29 ounces).
There are rubber bumpers on the four corners of the bottom of the
enclosure.
Click here to download this data sheet in pdf format
DATA458.PDF
Click here to download the User Guide in pdf format
USER458.ZIP
TDL Technology, Inc.
5260 Cochise Trail, Las Cruces, NM 88012-9736 USA
Voice 575-382-3173, FAX 575-382-8810
email: info@tdl-tech.com
